Methanol Spheres
Published in
- Login to post comments
The use of a Methanol Sphere is a cost effective, maintenance free method of injecting a regulated rate of methanol into a piping system. The design of the Methanol Sphere enables an effortless installation into the piping system wherever needed. The addition of an Ambient Temperature Control Valve provides further cost savings. This valve eliminates waste injection of the methanol at temperatures above 4°C.
24" OD Sphere (100F/-50F)
| PSI | Volume | Weight (dry) |
| 650 | 28.6 gal | 200 lbs |
| 950 | 27.7 gal | 275 lbs |
| 1480 | 25.9 gal | 350 lbs |
- Leg Mount - Three (3) 1-1/4" FNPT
- Post Mount - One (1) 2" FNPT
36" ID Sphere (100F/-50F)
| PSI | Volume | Weight (dry) |
| 650 | 105.8 gal | 650 lbs |
| 950 | 105.8 gal | 800 lbs |
| 1480 | 105.8 gal | 1275 lbs |
- Leg Mount - Three (3) 2" FNPT
- Post Mount - One (1) 3" FNPT
You need flash player to view this
Typical Process Nozzles:
- N1 Fill 2" Closure c/w Hammer Closure
- N2 Drain 1" FNPT
- N3 Vent 1/2" FNPT
- N4 PSV 1/4" FNPT
- N5 Equalize 1/4" FNPT
- N6 Liquid Outlet 1/4" FNPT
Typical Accessories:
- One (1) Ambient Temp. Control Valve (optional)
- One (1) Sight Glass Injector Assembly (visual for establishing metering valve set point)
- One (1) Metering Valve, 1/4" NPT, Set at 640 PSI, 940 PSI or 1470 PSI, Thermal Relief Only
- One (1) Ball Valve, 1/2" NPT 2M RP
- One (1) FS Hex Plug, 1" 6M, SA105N
- Three (3) 1-1/4" NPS x 6'-7'-0"/8'-0" Legs c/w 8"x8" Base Plate (24" Sphere)
- Three (3) 2"NPS x 6'-0"/7'-0"/8'-0" Legs c/w 8"x8" Base Plate (36" Sphere)